联系人:武经理
电话/微信:18210951310
QQ:272121253
为您提供录音棚系统解决方案和技术支持,请按以上方式与我们取得联系。
Ferrofish A32 Pro Dante 录音棚数模转换器
64-Channel ESS AD/DA Converter
Up to 24-bit / 192 kHz
32x32 模拟输入和输出, balanced on D-Sub25 (Tascam format)
64 Dante inputs and outputs via dual Ethernet socket with a redundancy function
Balanced 6.3 mm jack stereo main output with dedicated DAC monitoring path
32x32 ADAT inputs and outputs on Toslink sockets with 96 kHz support
WordClock input and output on BNC sockets with jitter reduction circuitry
MIDI input and output on 3.5 mm jack sockets
GPIO connector for unit monitoring and remote preset switching on D-Sub15
2 Stereo headphone outputs: 6.3 mm jack
Multitouch user interface on four TFT screens
Flexible routing matrix
Redundant power supply with a monitoring and alarm function
SHARC DSP for internal signal processing
Dual expansion slots for optional DSP sticks
Remotely controllable via RemoteFish App (Mac & Windows)
Fanless construction
Model: 19" / 1U
技术参数:
Dante I/O
2 x RJ-45 Ethernet connector (CAT5/6 cables),
64 x 64 channel Brooklyn series board built-in.
MADI I/O (AES10)
双SFP插槽MADI:多模或单模SFP模块作为默认配置,可选第二SFP模块可选
64通道@32kHz, 44.1kHz, 48kHz
32通道@64kHz, 88.2kHz, 96kHz
32通道@128kHz, 176.4kHz, 192kHz*
*两个MADI端口均用于实现全32+32通道传输
MIDI对MADI的支持。
延迟:3 samples
冗余:信号丢失时,自动切换光纤<->同轴MADI
模拟输入(AD)
ESS Tech新一代的模拟/数字转换器。
4 x DSub25 (Tascam格式)
数字增益:+20dBu…- 8dbu, 1dB步进
放大器:OPA1604 / OPA1664
电平显示器:TFT显示屏,28级
模拟输出 (DA)
新一代的ESS Tech模拟/数字转换器
4 x DSub25 (Tascam format)
数字增益: +20dBu … -8dBu, 1dB steps
OpAmps:OPA1604 / OPA1664
电平指示:TFT screen, 28 levels
耳机输出:
2 x”(6.3毫米)立体声TRS插孔,带有HQ放大器部分和专 用DAC路径。
提供独立立体声通道。
可选择单声道/立体声或M/S解码源的所有输入和输出。
数字控制音量电平
ADAT I/O
4+4 optical 光纤接口 (8 channels each with 48 kHz)
32 channels @32kHz, 44.1kHz, 48kHz
16 channels @64kHz, 88.2kHz, 96kHz
n/a @128kHz, 176.4kHz, 192kHz
Latency: 3 samples
GPIO Port
4x通用开关预置1-4输入。
4x通用输出,用于监控锁/电源/MADI/Temp警报。
MIDI I/O
2 x 1/8″ (3.5mm) TRS连接器用于远程控制
Conversion MIDI <> MIDI-over-MADI possible
MIDI 2.0 pinout
Wordclock I/O
BNC: 1 x 输入, 1 x 输出
75 Ohm Termination switchable for input
电源供电:
12V, 3A
2 ×输入插孔,带有螺丝锁,用于冗余电源。
电压监控,电源输入故障时屏幕显示警告信息
内部复位polyfuse
包括1 ×电源,第二个电源模块可选
US B Port:1 x US B 2.0 for Remote/ management
4 TFT screens yield a detailed, at-a-glance overview of settings and levels
Redundant power outputs supply extra peace of mind
技术参数
类型: Multi-format Converter多格式转换器
电脑连接: US B 2.0
Form Factor: Rackmount
模拟输入: 4 x DB-25
模拟输出: 4 x DB-25, 2 x 1/4" TS
数字输入: 4 x Optical Toslink (ADAT)
数字输出: 4 x Optical Toslink (ADAT)
耳机: 2 x 1/4" TRS
MIDI I/O: In/Out, 1/8"
US B: 1 x Type B
Data I/O: 2 x RJ45 (Dante), 2 x Optical Toslink (MADI)
Network: Dante, ADAT, MADI
Clock I/O: 2 x BNC
Other I/O: 1 x GPIO, 2 x DSP Stick
Rack Spaces: 1U
Power Supply: 12V DC power supply (included)
Height: 1.75"
Width: 19"
Depth: 10.6"
Weight: 9 lbs.
4 x 4 D-Sub25
8 模拟通道 on each D-Sub25
TASCAM pin-format, max 192kHz
Gain/Levels: -8dBu…+20 dBu (1dB steps).
MADI I/O: Dual SFP Slots
The two SFP slots allow a variety of configurations:
From a single module configuration to redundant
dual SFP Modes (Single-/Multimode or Coaxial) –
everything is possible.
US B Type-B
For firmware updates, plugin installation and remote control from a host computer. The A32pro Dante appears as a MIDI device.
4 x 4 ADAT TOSLINK
Each ADAT port transfers eight channels at a sample rate of 48kHz (= 32 In + 32 Out). A SMUX/2 mode up to 96k is also possible.
Dante Network I/O (redundant)
Two RJ-45 ports connect to any Dante audio network. Simply connect a LAN Ethernet cale (CAT5/CAT6) to the primary port. The secondary port takes automatically over in case of a network error (Dante Port Redundancy).
2x PHONES STEREO TRS (FRONT)
Monitoring of every stereo/mono or even M/S (Mid/Side) I/O channel by an dedicated DAC path.
Word Clock I/O
BNC with 75 Ohm
internal termination.
On/Off via display.
MIDI I/O
Dual 1/8″ (3.5mm) TRS I/O
(MIDI 2.0 layout)
for remote Control
MIDI-over-MADI
Redundant Power Supply
Ground-loop free, coaxial DC connector with secure, stable and relaible screw-lock. One PSU is included.